Theta Sheath System Manual

Theta Sheath System (TSS) and included knife Product Manual

 The Theta Sheath is a quick deployment minimalist sheath system designed to accommodate a range of attachment or mounting options. Mount spacing is ¾”. Mounts can be added to either side of the system. The locking cam can be placed on either side. Cam screws are different lengths and the longer screw should be used against the locking cam. Care needs to be taken when seating the cam onto the spindle as the fit is very tight and deformation of parts can take place if the screw is tightened when the alignment is incorrect.

Sheathing and Unsheathing:

Operation is via rotation of the locking cam, releasing the locking cam from the knife scales. The knife can then be removed out of the sheath. Sheathing is done by lining up the belly of the knife into the sheath track and then pushing forward. This will rotate the locking cam until it slides into the scale slots, locking the knife back into the sheath. The end user needs to ensure the locking cam has fully engaged.

Cleaning:

Cleaning of the TSS can be accomplished using simple soap and water. The track should be clear of dirt or debris and all areas around the locking cam should be clean. Sometimes disassembly of the TSS is needed. The cam spindle and its spring should be free of dirt and debris. Scale slots in the knife are connected via a space in the tang of the blade and can be cleaned by flushing the cleaning solution through the slots.

Warranty: The TSS and its accompanying knife carry a Limited Lifetime Warranty on original workmanship and materials. This does not include screws or spacer bushings. This product is guaranteed to be free of defects in original material and construction. This does not include normal wear, corrosion, or damage/breakage due to improper use. Please contact Rexford Knives to receive warranty repair or replacement.

Liability Disclaimer: The Theta Sheath System and any included cutlery are intended and sold for legitimate utility and sporting purposes only. The purchase, use, and carry of this product may be subject to State, local, and federal laws/regulations. It is the responsibility of the purchaser to comply with all laws and regulations he/she may be subject to. The purchaser is solely responsible for any claims resulting from violation of these laws/regulations. This product should be checked regularly for any deterioration, cleanliness, or wear. All sheathing and unsheathing operations should be done with the utmost care to ensure correct alignment and locking. Locking mechanisms must be checked during use, carry, before and after manipulation, and during any change in position. Accidental manipulation of locking and securing mechanisms are not the responsibility of Rexford Knives. Aftermarket products attached to the system can cause incorrect operation and are not the responsibility of Rexford Knives. Use while deteriorated, dirty, or worn is considered misuse and abuse. Any other use is considered misuse or abuse. Rexford Knives is not responsible for any injuries or damages to the user, other persons, or property that may be caused by the use, misuse, or abuse of this product.